General information on this kind of Iridium oxide coating titanium anode:
The substrate material: Grade 1 titanium or Grade 2 titanium
Coating Material: IrO₂+Ta₂O₅+X

Get A Quote

In cathodic protection, it is anticipated that the Faradic wear rate will be approximately 0.5 to 1.0 micrograms of coating per ampere-hour. Wear rates for other applications are generally low but depend on current density and other operating conditions. It is anticipated that the Faradic wear rate will be approximately 0.5 to 1.0 micrograms of coating per ampere-hour. Wear rates for other applications are generally low but depend on current density and other operating conditions.

Application field: The MMO anode is used for tank bottom protection and cathodic protection of reinforced concrete structures. In the application, can be directly laid on wet or salt sand without any carbon-based filler material.

For more reference content of anodes on the requirement for Cathodic Protection, please click the link below for more information:

Titanium Conductive Band Common Specifications:

1. Substrate: ASTM B265 titanium plate
2. Specifications: with width of 6.35mm and thickness of 0.635mm or width of 12.7mm and thickness of 0.9mm
3. The standard length: 152 m / roll
4. The output current: 68mA / m
5. The expected life: 70 years

It can be applied to any environment, including sand environment, oxygen evolution, chlorine evolution or mixing environment, or other complicated environment.

good corrosion resistance, stable chemical performance and long service life.

Baoji Yongji Titanium Anode has been a professional manufacturer of Titanium anodes that is suitable for a wide variety of end uses for more than 20 years. With experienced operators and a professional RD team, we are able to provide you high-quality anode for plating with a long life span.

Please describe your requirement in as detail as possible, it is useful for us to offer you a better solution.